Page 1 of 1

Newbies experiences with a Malyan M150

Posted: Tue Feb 28, 2017 2:46 pm
by Colin
I will add some text in the fullness of time, but in the meantime some pictures...
M150.jpg
The M150. The filament reel is sitting on one of my first mods - a reel holder which allows freer access to the filament
M150.jpg (88.01 KiB) Viewed 3950 times
Since the above I have added a Raspberry Pi with a webcam running Octaprint. This allows me to view and control the printer from anywhere. The Pi is inside a 3D printed case of course. (You can view this yourselves here. The 'Control' tab brings up the webcam, although it may not be printing at the time!)
M150 with Pi.jpg
Raspberry Pi attached to the M150
M150 with Pi.jpg (21.64 KiB) Viewed 3950 times
So what can we do with it? Well still learning here but the next post will show some examples...

Re: Newbies experiences with a Malyan M150

Posted: Tue Feb 28, 2017 3:00 pm
by Colin
So here are some examples ...
Pilot (unpainted).jpg
Pilot (unpainted).jpg (37.07 KiB) Viewed 3949 times
Pilot (painted).jpg
Pilot (painted).jpg (39.75 KiB) Viewed 3949 times

To come...
Maule Cowl.JPG
New cowl for my Maule M5
Maule Cowl.JPG (15.68 KiB) Viewed 3949 times