Jitterbug by A. Whittaker

Models built from commercial plans

Re: Jitterbug by A. Whittaker

Post by brian » Sat May 24, 2014 2:42 pm


I have seen a blog today where the wings are 10.5 and the wing seating is only 10". I think this affects CNC parts and My hobbystores/Slec plans. Some builders have notched the trail edge of the wing to fit.

Hope yours off the plan is different.


Posts: 15
Joined: Fri Feb 01, 2013 9:13 pm

Re: Jitterbug by A. Whittaker

Post by MikeW » Sat Jun 14, 2014 6:28 am

Well, its pretty much finished at last. Only needs balancing and noise testing, and then its maiden flight time.
Although the CofG is marked on the plans, I could not find any recommended settings for elevator, rudder etc. I've sent an email to Alex Whittaker - lets see if he comes back with any suggestions.
IMGP6223.jpg (191.15 KiB) Viewed 7067 times

Post Reply